- Smooth jaws with contoured inside edges to protect components.
- Finish: Matt burnished finish red grips.
Micro-Tech? extra-long nose gripper pliers
Hand Tools > Pliers > Pliers - Micro
401.MT
- For powerful loads.
Weight: 80 g.
Half-round nose pliers
Hand Tools > Pliers > Pliers - Micro
402
- 402: Short smooth jaws.
- 442: Short serrated jaws with side wire-cutter (2 mm dia. copper 1 mm dia. steel 100 kg/mm-).
- 403: Smooth jaws angled 40-.
- Finish: Matt burnished finish red grips - return spring.
Half-round nose pliers
Hand Tools > Pliers > Pliers - Micro
403
- 402: Short smooth jaws.
- 442: Short serrated jaws with side wire-cutter (2 mm dia. copper 1 mm dia. steel 100 kg/mm-).
- 403: Smooth jaws angled 40-.
- Finish: Matt burnished finish red grips - return spring.
Micro-Tech? extra-long angled nose grippers
Hand Tools > Pliers > Pliers - Micro
403.MT
- For powerful loads.
Weight: 75 g.
ESD rugged cutters: versatility
Hand Tools > Pliers > Pliers - Micro
405.10E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers allow neat cutting of multiple materials: from copper wire to piano wire up to 0.5 mm.
- Fall prevention models avoid wire ejection.
Weight: 65 g.
Micro-Tech? rugged cutters: versatility
Hand Tools > Pliers > Pliers - Micro
405.10MT
- These pliers allow neat cutting of multiple materials: from copper wire to piano wire up to 0.5 mm.
- Fall prevention models avoid wire ejection.
Weight: 60 g.
ESD rugged cutters: versatility
Hand Tools > Pliers > Pliers - Micro
405.10RE
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers allow neat cutting of multiple materials: from copper wire to piano wire up to 0.5 mm.
- Fall prevention models avoid wire ejection.
Weight: 65 g.
Micro-Tech? rugged cutters: versatility
Hand Tools > Pliers > Pliers - Micro
405.10RMT
- These pliers allow neat cutting of multiple materials: from copper wire to piano wire up to 0.5 mm.
- Fall prevention models avoid wire ejection.
Weight: 60 g.
Diagonal cutters
Hand Tools > Pliers > Pliers - Micro
405.12
- 405: Axial cut.
- 416 - 435: Semi-flush cut slim nose.
- 425: Flush cut nose extended 13 mm.
- Finish: Matt burnished finish red grips - return spring.
ESD high capacity cutters:
Hand Tools > Pliers > Pliers - Micro
405.12E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers are suited to major efforts and repetitive work over a broad range of materials.
- Fall prevention models avoid wire ejection.
Weight: 105 g.
Micro-Tech? high capacity cutters: power
Hand Tools > Pliers > Pliers - Micro
405.12MT
- These pliers are suited to major efforts and repetitive work over a broad range of materials.
- Fall prevention models avoid wire ejection.
Weight: 95 g.
ESD small mesh cutters: thin
Hand Tools > Pliers > Pliers - Micro
405.8E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These small mesh pliers are adapted to miniaturisation of electronic components.
- The flush cutting model was extended to optimise access.
Weight: 55 g.
Micro-Tech? small mesh cutters: thin
Hand Tools > Pliers > Pliers - Micro
405.8MT
- These small mesh pliers are adapted to miniaturisation of electronic components.
Weight: 60 g.
ESD compact cutters: handling
Hand Tools > Pliers > Pliers - Micro
405.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers combine cutting performance with handling thanks to their new slim diagonal shape.
- The 405.MT pliers allow to cut piano wire up to 0.4 mm.
Weight: 65 g.
Micro-Tech? compact cutters: handling
Hand Tools > Pliers > Pliers - Micro
405.MT
- These pliers combine cutting performance with handling thanks to their new slim diagonal shape.
- Fall prevention models avoid wire ejection. The 405.MT pliers allow to cut piano wire up to 0.4 mm.
Weight: 60 g.
Micro-Tech? small mesh cutters: thin
Hand Tools > Pliers > Pliers - Micro
406.8MT
- These small mesh pliers are adapted to miniaturisation of electronic components.
Weight: 60 g.
ESD compact cutters: handling
Hand Tools > Pliers > Pliers - Micro
406.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers combine cutting performance with handling thanks to their new slim diagonal shape.
- The 405.MT pliers allow to cut piano wire up to 0.4 mm.
Weight: 65 g.
Micro-Tech? compact cutters: handling
Hand Tools > Pliers > Pliers - Micro
406.MT
- These pliers combine cutting performance with handling thanks to their new slim diagonal shape.
- Fall prevention models avoid wire ejection. The 405.MT pliers allow to cut piano wire up to 0.4 mm.
Weight: 60 g.
Micro-Tech? compact cutters: handling
Hand Tools > Pliers > Pliers - Micro
406.RMT
- These pliers combine cutting performance with handling thanks to their new slim diagonal shape.
- Fall prevention models avoid wire ejection. The 405.MT pliers allow to cut piano wire up to 0.4 mm.
Weight: 60 g.
Micro-Tech? small mesh cutters: thin
Hand Tools > Pliers > Pliers - Micro
407.8MT
- These small mesh pliers are adapted to miniaturisation of electronic components.
Weight: 60 g.
ESD compact cutters: handling
Hand Tools > Pliers > Pliers - Micro
407.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers combine cutting performance with handling thanks to their new slim diagonal shape.
- The 405.MT pliers allow to cut piano wire up to 0.4 mm.
Weight: 65 g.
Micro-Tech? compact cutters: handling
Hand Tools > Pliers > Pliers - Micro
407.MT
- These pliers combine cutting performance with handling thanks to their new slim diagonal shape.
- Fall prevention models avoid wire ejection. The 405.MT pliers allow to cut piano wire up to 0.4 mm.
Weight: 60 g.
410 - Connector pliers
Hand Tools > Pliers > Pliers - Micro
410
- For handling fragile round components e.g. screwed connector sleeves tubes lamps or wire looms etc.
- Wide capacity from 3-position slip joint: max. diameter 55 mm.
- Replaceable plastic jaws available in 2 jaw hardness options:
- 410: hard jaws - 70 shore B.
- 410.S: soft jaws - 55 shore B.
- Finish: polished chrome red PVC grips.
Spare jaws:
- 410.1: Set of 2 jaws with screws (hard).
- 410.S1: Set of 2 jaws with screws (soft).
ESD high capacity cutters:
Hand Tools > Pliers > Pliers - Micro
415.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers are suited to major efforts and repetitive work over a broad range of materials.
- Fall prevention models avoid wire ejection.
Weight: 105 g.
Micro-Tech? high capacity cutters: power
Hand Tools > Pliers > Pliers - Micro
415.MT
- These pliers are suited to major efforts and repetitive work over a broad range of materials.
- Fall prevention models avoid wire ejection.
Weight: 95 g.
Diagonal cutters
Hand Tools > Pliers > Pliers - Micro
416
- 405: Axial cut.
- 416 - 435: Semi-flush cut slim nose.
- 425: Flush cut nose extended 13 mm.
- Finish: Matt burnished finish red grips - return spring.
ESD high capacity machined cutters
Hand Tools > Pliers > Pliers - Micro
416.12E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- Broadly dimensioned for large series works.
Weight: 105 g.
Micro-Tech? high capacity machined cutters
Hand Tools > Pliers > Pliers - Micro
416.12MT
- Broadly dimensioned for large series works.
- Semi-flush cutting.
Weight: 95 g.
ESD tip cutters
Hand Tools > Pliers > Pliers - Micro
416.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- Compact noses for difficult access.
Weight: 65 g.
Micro-Tech? machined cutters
Hand Tools > Pliers > Pliers - Micro
416.MT
- Compact noses for difficult access.
- Fall prevention models avoid wire ejection.
Weight: 60 g.
ESD thin nose machined cutters: handling
Hand Tools > Pliers > Pliers - Micro
416.PE
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers pass under all obstacles of the PCB and provide better visibility.
Weight: 65 g.
Micro-Tech? thin nose tip cutters: handling
Hand Tools > Pliers > Pliers - Micro
416.PMT
- These pliers pass under all obstacles of the PCB and provide better visibility.
Weight: 60 g.
Micro-Tech? machined cutters
Hand Tools > Pliers > Pliers - Micro
416.RMT
- Compact noses for difficult access.
- Fall prevention models avoid wire ejection.
Weight: 60 g.
ESD thin nose machined cutters: handling
Hand Tools > Pliers > Pliers - Micro
417.PE
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers pass under all obstacles of the PCB and provide better visibility.
Weight: 65 g.
Micro-Tech? thin nose tip cutters: handling
Hand Tools > Pliers > Pliers - Micro
417.PMT
- These pliers pass under all obstacles of the PCB and provide better visibility.
Weight: 60 g.
ESD diagonal cutters for DIP-CMS components
Hand Tools > Pliers > Pliers - Micro
417.SPE
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers provide access between two legs of "DIP " components with a 0.65 mm gap. Due to their shape these pliers can be used only in this configuration.
Weight: 60 g.
Micro-Tech? diagonal cutter for DIP - CMS components
Hand Tools > Pliers > Pliers - Micro
417.SPMT
- These pliers provide access between two legs of "DIP " components with a 0.65 mm gap. As they are extremely thin these pliers can be used only for this function.
- Cut: flush.
Weight: 60 g.
Micro-Tech? tip cutters
Hand Tools > Pliers > Pliers - Micro
418.MT
- Long and narrow nose for vertical access cut.
- Cut: flush.
Weight: 75 g.
Micro-Tech? shaping gripper pliers
Hand Tools > Pliers > Pliers - Micro
420.MT
- Very thin nose.
Weight: 60 g.
401-421 - Flat nose pliers
Hand Tools > Pliers > Pliers - Micro
421
- Smooth jaws with contoured inside edges to protect components.
- Finish: Matt burnished finish red grips.
Micro-Tech? long and rigid nose grippers
Hand Tools > Pliers > Pliers - Micro
421.MT
Weight: 70 g.
Micro-Tech? long and rigid nose grippers
Hand Tools > Pliers > Pliers - Micro
422.MT
Weight: 70 g.
Micro-Tech? 60? angled rigid nose grippers
Hand Tools > Pliers > Pliers - Micro
423.MT
Weight: 70 g.
Micro-Tech? short and rigid nose grippers
Hand Tools > Pliers > Pliers - Micro
424.MT
Weight: 55 g.
Diagonal cutters
Hand Tools > Pliers > Pliers - Micro
425
- 405: Axial cut.
- 416 - 435: Semi-flush cut slim nose.
- 425: Flush cut nose extended 13 mm.
- Finish: Matt burnished finish red grips - return spring.
ESD extended cutters: access
Hand Tools > Pliers > Pliers - Micro
425.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers allow to go further; up to + 1.5 to 2 mm compared with standard pliers.
- Fall prevention models avoid wire ejection.
Weight: 65 g.
Micro-Tech? long cutters: access
Hand Tools > Pliers > Pliers - Micro
425.MT
- These pliers allow to go further; up to + 1.5 to 2 mm compared with standard pliers.
- Fall prevention models avoid wire ejection.
Weight: 60 g.
ESD long thin cutters with clearance
Hand Tools > Pliers > Pliers - Micro
426.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers allow to cut behind components and pass under obstacles (coils resistors...).
Weight: 65 g.
Micro-Tech? long thin cutters with clearance
Hand Tools > Pliers > Pliers - Micro
426.MT
- These pliers allow to cut behind components and pass under obstacles (coils resistors...).
Weight: 60 g.
ESD 30? angled cutters
Hand Tools > Pliers > Pliers - Micro
427.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- Cutting edges angled at 30- with rear clearance.
Weight: 65 g.
Micro-Tech? 30? nose cutters
Hand Tools > Pliers > Pliers - Micro
427.MT
- Cutting edges angled at 30- with rear clearance.
- Cut: flush.
Weight: 65 g.
ESD 70? angled cutters
Hand Tools > Pliers > Pliers - Micro
429.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- Cutting edges angled at 70- with rear clearance.
Weight: 66 g.
Micro-Tech? 70? nose cutters
Hand Tools > Pliers > Pliers - Micro
429.MT
- Model with wide cutting edges angled at 70- broadly cleared.
- Cut: flush.
Weight: 60 g.
ESD short flat nose cutters
Hand Tools > Pliers > Pliers - Micro
431.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- Narrow mesh for high precision works.
Weight: 75 g.
ESD thin flat-nose pliers
Hand Tools > Pliers > Pliers - Micro
431.LE
- Protection of electronic components from risks of electrostatic discharge (ESD).
- Narrow mesh for high precision works.
Weight: 75 g.
Micro-Tech? thin nose grippers
Hand Tools > Pliers > Pliers - Micro
431.LMT
- Narrow mesh for high precision works.
Weight: 80 g.
Micro-Tech? short nose gripper pliers
Hand Tools > Pliers > Pliers - Micro
431.MT
- Narrow mesh for high precision works.
Weight: 55 g.
ESD half-round nose cutters
Hand Tools > Pliers > Pliers - Micro
432.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- Fine mesh.
Weight: 70 g.
ESD half-round thin nose cutters
Hand Tools > Pliers > Pliers - Micro
432.LE
- Protection of electronic components from risks of electrostatic discharge (ESD).
- Narrow mesh for high precision works.
Weight: 70 g.
Micro-Tech? thin nose grippers
Hand Tools > Pliers > Pliers - Micro
432.LMT
- Fine mesh for high precision works.
Weight: 65 g.
Micro-Tech? short nose gripper pliers
Hand Tools > Pliers > Pliers - Micro
432.MT
- Fine mesh.
Weight: 55 g.
ESD half-round angled nose cutters
Hand Tools > Pliers > Pliers - Micro
433.LE
- Protection of electronic components from risks of electrostatic discharge (ESD).
- 45- angled nose.
- Narrow mesh for high precision works.
Weight: 70 g.
Micro-Tech? 45? angled thin nose grippers
Hand Tools > Pliers > Pliers - Micro
433.LMT
- Fine mesh for high precision works.
Weight: 75 g.
ESD extended cutters: access
Hand Tools > Pliers > Pliers - Micro
435.E
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers allow to go further; up to + 1.5 to 2 mm compared with standard pliers.
- Fall prevention models avoid wire ejection.
Weight: 65 g.
Micro-Tech? long cutters: access
Hand Tools > Pliers > Pliers - Micro
435.MT
- These pliers allow to go further; up to + 1.5 to 2 mm compared with standard pliers.
- Fall prevention models avoid wire ejection.
Weight: 60 g.
ESD extended cutters: access
Hand Tools > Pliers > Pliers - Micro
435.RE
- Protection of electronic components from risks of electrostatic discharge (ESD).
- These pliers allow to go further; up to + 1.5 to 2 mm compared with standard pliers.
- Fall prevention models avoid wire ejection.
Weight: 65 g.
Micro-Tech 16-tool set - screwdriver + bits
Hand Tools > Pliers > Pliers - Micro
AEM.J1
Comprising:
- 1 bit holder screwdriver AEM.M.
- 5 bits series 0 for slotted head screw: ES.002 - ES.002.5 - ES.003 - ES.004 - ES.004.5.
- 2 bits series 0 for Phillips: EP.0x2 - EP.000.
- 2 bits series 0 for Pozidriv: ED.0x2 - ED.000.
- 3 bits series 0 hex: EH.001.5 - EH.002 - EH.002.5.
- 3 bits series 0 hex spherical head: ETS.001.5 - EH.002 - EH.002.5.
- Case dimensions: 183 x 109 x 32 mm.
Weight: 237 g.
Micro-Tech 26-tool set - socket holder + bits + sockets
Hand Tools > Pliers > Pliers - Micro
AEM.J2
Comprising:
- 1 bit holder screwdriver AEM.M.
- 5 bits series 0 for slotted head screw: ES.002 - ES.002.5 - ES.003 - ES.004 - ES.004.5.
- 2 bits series 0 for Phillips: EP.0x2 - EP.000.
- 2 bits series 0 for Pozidriv: ED.0x2 - ED.000.
- 3 bits series 0 hex: EH.001.5 - EH.002 - EH.002.5.
- 3 bits series 0 hex spherical head: ETS.001.5 - EH.002 - EH.002.5.
- 4 bits series 0 for Torx: EX.006 - EX.007 - EX. 008 - EX.010.
- 1 socket holder ECR.0.
- 5 1/4- sockets: R.3.2 - 4 - 5 - 5.5 - 7 mm.
- Case dimensions: 205 x 130 x 31 mm.
Weight: 340 g.
MICRO LONG NOSE PLIER
Hand Tools > Pliers > Pliers - Micro
E117877
MICRO LONG BENT NOSE PLIER
Hand Tools > Pliers > Pliers - Micro
E117878
MICRO CUTTING PLIER EXTRA FLUSH CUT
Hand Tools > Pliers > Pliers - Micro
E117882
MICRO FLAT NOSE PLIER
Hand Tools > Pliers > Pliers - Micro
E117883
MICRO CUTTING PLIER FLUSH CUT
Hand Tools > Pliers > Pliers - Micro
Micro-Tech 16-tool set
Hand Tools > Pliers > Pliers - Micro
MT.J1
Comprising:
- 6 slotted head screwdrivers: AE.1 x 35 - AE.1.2 x 35 - AEF.1.5 x 35 - AEF.1.8 x 35 - AEF.2 x 35 - AEF.2.5 x 35.
- 2 Phillips screwdrivers: AEP.000 x 35 - AEFP.00 x 35.
- 3 hex screwdrivers: 84E.0.9 x 35 - 84E.1.3 x 35 - 84E.1.5 x 35 .
- 2 pairs of pliers 405.10MT- 432LMT.
- 1 pair of scissors 841.1.
- 1 cutter 845.1.
- 1 pair of tweezers 140AA.
- Case dimensions: L.366 x W.180 x H.66 mm.
Weight: 1075 g.
Micro-Tech 11-tool set
Hand Tools > Pliers > Pliers - Micro
MT.J3
Comprising:
- 5 slotted head screwdrivers: AE.1.2 x 35 - AEF.1.5 x 35 - AEF.1.8 x 35 - AEF. 2 x 35 - AEF.2.5 x 35.
- 3 Phillips screwdrivers: AEFP.000 x 35 - AEFP.00 x 35 - AEFP.0 x 35.
- 1 pair of tweezers: 140A.
- 2 pair of pliers: 405.10 MT - 432 LMT.
- Case dimensions: L.285 x W.138 x H.26 mm.
Weight: 726 g.